Expert Answers about A-Frame Trailer Coupler

• A-Frame Trailer Coupler that Can be Bolted Onto a Trailer
• Bulldog A-frame trailer coupler # BD43805W0317 does not have holes on the side because it is a weld-on coupler. Coupler # BD44150WH301 can be bolted on but it is for a 2-5/16 inch ball, not a 2 inch ball like # BD43805W0317. All of the other A-frame couplers we have are weld-on applications. If you go with a weld-on coupler the welding will need to be performed by a qualified professional welder.
  view full answer...


• Bolts for Demco A-Frame Trailer Coupler
• The Demco A-Frame Trailer Coupler # DM14793-81 (Black) or # DM14793-52 (Silver) do not come with bolts. You will need to use 1/2" Grade 5 hex bolts with them. I've added links to video reviews of each coupler for you to check out.
  view full answer...


• What is Material of Latch on Demco A-Frame Trailer Coupler # DM14793-81
• The EZ latch of the Demco A-Frame Trailer Coupler # DM14793-81 that you referenced is made from a composite plastic. I know plastic might seem weak or flimsy, but it's a really strong material that has the benefit of being corrosion resistant.
  view full answer...


• Is Mounting Hardware Included with Demco A-Frame Trailer Couplers
• Hardware is not included with Demco coupler # DM14793-81. The reason for this is different applications can require different hardware whether it be length or material (because dissimilar metals can lead to corrosion problems).
  view full answer...


• Package Contents of Demco A-Frame Trailer Coupler with Jack Center Hole # DM16680-52
• The Demco coupler # DM16680-52 you were looking at does not include the hardware needed for installation. It would be a good idea to switch over from your weld on to a bolt on coupler, this will make it a whole lot easier to replace over time as it wears out as you have stated.
  view full answer...


• What Hardware is Needed for the Bulldog Heavy-Duty Cast Head Coupler With Wedge Latch
• The Bulldog Heavy-Duty A-Frame Coupler, # BD44150WH301, does not come with the attachment bolts. I have attached two images showing the bolt pattern measurements and the bolt hole sizes. I would recommend using grade 8 bolts, but grade 5 is acceptable and the amount of bolts you will need will depend on how you plan on mounting the coupler. I would recommend using the bolt holes on the side of the coupler to mount to your trailer. I spoke with my contact for Bulldog and he said you will...
  view full answer...


• Timbren Axle-Less Suspension # A35RD545E on Trailer Towed By 2013 Ram 1500
• The Timbren Axle-Less Suspension system you mentioned, part # A35RD545E does include the electric brake assemblies. As you will see in the photo I provided, each brake assembly has two wires extending from the rear. One wire would ground directly to the trailer frame, while the other will connect to the brake output circuit from the trailer connector. The Tekonsha Prodigy P2, part # 90885 would be an excellent controller for your needs. I am assuming that your boat trailer uses a hydraulic...
  view full answer...


• Weight of a Whole Bunch of Different Trailer Parts
• I'd be happy to let you know the weights of all of the parts you asked about, and I'll even do it in descending order. - Timbren Axle-Less Trailer Suspension System w Electric Brake Hubs # A35RS545E: 134 lbs - Dexstar Steel Mini Mod Trailer Wheel # AM20545: 25 lbs - Pro Series Round, Snap-Ring Swivel Jack # PS1400300303: 13 lbs - Channel Tongue Trailer Coupler # CT-3002-Z: 4 lbs I have also attached links to video reviews of these parts for you to take a look at.
  view full answer...


• Is Mounting Hardware Included with Ultra-Fab Electric A-Frame Jack # UF38-944037
• You will source your own hardware for installation of the Ultra-Fab Electric A-Frame Jack # UF38-944037 on your a-frame trailer. Grade 5 stainless steel hardware is recommended and the mounting flange has two hole patterns for convenient fit with 2-inch or 2-1/4-inch hole spacing on your trailer frame.
  view full answer...


• Straight Stinger for Jack-It 2 Bike Rack for A-Frame Trailers
• The Jack-It 2 Bike Rack for A-Frame Trailers # LC429756 we carry only comes with the angled stinger, but you can pick up the straight stinger separately as part # LC67HD on our site. This then allows you to have the bikes offset or directly above your trailer A-Frame jack depending on your application.
  view full answer...


• Does Replacement Top Cover for A-Frame Jack Come Without Switches
• The Replacement Top Cover for Lippert Components Electric Trailer Jack # LC285160 is only available with the switches on the front. It is the direct replacement cover for the 3,500 lb Lippert Electric Trailer Jack # LC285318. The only similar top cover that does not have switches is the Replacement Cover for Stromberg Carlson Jack # JET-2500-02 which is the direct replacement for the 2,500 lb Stromberg Carlson Electric A-Frame Tongue Jack # JET-2500.
  view full answer...


• Does Lippert Power Stance Electric Camper Jack Come with 7-Way Plug?
• The Lippert Power Stance Electric Trailer Jack w/ 7-Way Plug - A-Frame - 18" Lift - 3,500 lbs # LC89VR comes with the auxiliary power wire for trailer 7-way power connection. However, the Lippert Power Stance Electric Trailer Jack with Footplate - A-Frame - 18" Lift - 3,500 lbs # LC69VR comes with the power wire for the trailer battery connection only. The Auxiliary Power Cord for Lippert Power Stance Electric Trailer Jack # LC79VR is sold separately and is 6 feet long.
  view full answer...


• Are There Anti-Rattle Bolts Needed for the Jack-It 2 Bike Rack for A-Frame Trailers
• The Jack-It 2 Bike Rack for A-Frame Trailers part # LC429756 comes with two threaded hitch pin bolts which will work to reduce rattle and vibrations so you don't need to purchase any extra devices as this feature is already built-in. I have attached a photo for you which shows the two threaded hitch pin bolts. The only extra item you might want to add are locks for the bikes which can be accomplished with the etrailer.com 10' Long Cable Lock part # e98891.
  view full answer...


• How Many Cams Are Included In The Package For Reese Dual Cam High-Performance Sway Control
• The Reese Dual Cam High-Performance Sway Control, part # RP26002 has 2 cams, one for each side of the trailer. These cams are designed to work with round or trunnion cam-style bars. This is a simple bolt-on system for A-frame trailers with a frame width that does not exceed 2-1/2 inches.
  view full answer...


• Does the Remov-A-Ball Gooseneck Trailer Hitch Come with a Hitch Ball
• The Remov-A-Ball Gooseneck Trailer Hitch part # 6300-4456 comes with the 2-5/16" gooseneck hitch ball. Therefore, you do not need to purchase the gooseneck hitch ball separately. This kit is a custom fit for your 2019 GMC Sierra 2500 and will not require any drilling into the frame rail. It has a removable gooseneck hitch ball and comes with a lifetime warranty. Since you will be installing a gooseneck trailer hitch in your truck bed, I also recommend you add an in-bed wiring harness...
  view full answer...


• What Parts Do I Need To Install A Curt Trailer Hitch and Wiring On My 2011 Ford Flex?
• All the parts you need to install the hitch is included with the Curt Hitch receiver # 13551. This hitch receiver is for a Ford Flex with dual exhaust. You will need the Curt T-Connector Wiring Harness to allow you to hook up to your camper. The wiring that I recommend for your 2011 Ford Flex is # C55774. This gives you the option of using either a 4-pole connector or a 7-Pole connector. You also need a ball mount like # C74WR for an 8000-lb capacity or the # WSFH2-2 for a 10,000-lb capacity...
  view full answer...


• Does The Curt Trailer Hitch Include Mounting Hardware and Wiring For 1996 Ford Probe
• On the Curt # C11720, for the 1996 Ford Probe the mounting hardware is included. It does not come with any wiring. The wiring harness you would need is the Wiring, # C59496. You also need the ball mount # C45521 and pin and clip # F-4. The hitch ball you will need will depend on the trailer coupler size you will be towing. The most common size hitch ball is the 2 inch ball. For the 2 inch ball you will need the Tow Ready 2 Inch Hitch Ball, # 19258. If you have a 1-7/8 inch ball then you...
  view full answer...


• Is all the Installation Hardware Included with the Curt A20 Fifth Wheel Hitch C16536
• The Curt A20 Fifth Wheel with Slider, part # C16541, is just the hitch. Since installation kits are specific to vehicles, they are sold separately. For a 2010 GMC Sierra 2500 with 6 foot bed, you use part # RP50064-58 as your install kit. It includes custom fit brackets that bolt through and around the truck frame, as well as the rails that sit in the truck bed for the hitch to attach to. If you order part # 30083 and part # 50064-58 you will have everything you need to install the fifth...
  view full answer...


• Trailer Hitch for Swagman XC2 Hitch Mount Bike Rack on 2003 Subaru Forester
• The Swagman XC 2-Bike Rack for 1-1/4" and 2" Trailer Hitches # S64650 is a great platform bike option for your 2003 Subaru Forester, so long as it is already equipped with a trailer hitch receiver, like the Draw-Tite Trailer Hitch Receiver # 36311, designed to fit the frame of your Forester. To use the bike rack, you do not need any extra parts. Everything you need to install it on a trailer hitch is included with part # S64650. The only time you'll need to use a ball mount, is for trailer...
  view full answer...


• Can the Ground Control TT Automatic Leveling System be Ordered Without the A-Frame Jack
• Even though Lippert (LCI) does make different electric trailer jacks like parts # LC285318 and # LC643589, if you are wanting to use the Electric Ground Control TT Automatic 5-Point Travel Trailer Leveling System # LC672136 then you need to replace your current jack with the electric jack that comes with this system. It has specific programming that allows it to communicate with the control unit for the leveling system and the other electrical jacks don't have this built-in so they wouldn't...
  view full answer...